ECHO TR 脚踏
	ECHO TR pedal

• 超轻设计，每对仅重295克；
• 新外壳设计，外壳厚度由22毫米改为24毫米，外齿结构由密齿改为疏齿；
• 铬钼合金钢轴心，热处理硬化；
• 本体为铝合金锻造加工而成，强度可靠；
• 全密封轴承式设计，绝不松动；
• 有10种不同颜色可供选择。

• super light, 295g per pair.
• New Cage design , Cage thickness 24mm
• heat treaded crmoly steel axle.
• 6061 forged body.
• sealed ball bearing + DU bearing.
• In 10 different anodized color.

	ECHO TR 飞轮
	ECHO TR freewheel

• 108响设计，9个棘爪，每三个一组；
• 特殊弹簧设计，几乎从不跳齿；
• 全铬钼合金钢精制，热处理硬化，强度极高；
• 178克。

• 108 match points, 9 pawls. 3 pawls for one match point.
• Unique springs design, almost never skip, much louder than most freewheels.
• Full Crmoly steel construction.
• 178g

	ECHO TR 液压碟刹
	ECHO TR hydraulic disc brake

• 鲍鱼采用铝合金锻造毛坯经CNC加工而成，强度高重量轻；
• 手闸可以左右手互换；
• 仅为矿物油设计，绝对不可以使用任何其他液体，包括DOT汽车制动液、清水、润滑机油，否则密封圈会很快被泡大或者磨损。这样造成的损坏不提供保修。
• 不把刹车碟和固定碟片的6颗螺丝钉计算在内的话，一套刹车230克。
• 160毫米刹车碟和固定螺钉重量为128克；
• 180毫米刹车碟和固定螺钉重量为150克；
• 仅一个颜色。

• Forged 6061 T6 clipper for high strength.
• main cylinder holder is extruded 6061 T6 CNC, compatible for both side.
• For mineral oil only, don't use "DOT" fluid for this brake.
• 230 for the whole set without disc rotor and 6 bolts.
• 128g for 160mm rotor and 6 bolts.
• 150g for 180mm rotor and 6 bolts.
• Available in one color only.

	ECHO TR 液压圈刹
	ECHO TR hydraulic brake set

• 副油缸为铝合金锻造，经过CNC加工而成，高强度，高精度；
• 手闸可以左右手互换；
• 仅为矿物油设计，绝对不可以使用任何其他液体，包括DOT汽车制动液、清水、润滑机油，否则密封圈会很快被泡大或者磨损。这样造成的损坏不提供保修。
• 每套约190克，此重量不包括刹车卡钳及卡钳螺钉（需要另外购买）；
• 仅一个颜色。

• Forged 6061 T6 slave cylinders for high strength.
• main cylinder holder is extruded 6061 T6 CNC, compatible for both side.
• For mineral oil only, don't use "DOT" fluid for this brake.
• In black color only.
• 190g.

	ECHO TR 圈刹卡钳
	ECHO TR brake clamp

• 6061铝合金T6处理，经过CNC精密加工而成；
• 无调整球头垫圈，重量轻，但不可以调整刹车皮的角度；
• 含螺钉重量为56克，所有螺钉为铬钼钢12.9级强度；
• 10个颜色供选择。

• AL 6061 T6 CNC
• No ball spacer design.
• 56g include bolts.
• In 10 different anodized color.

	ECHO TR 前叉碗
	ECHO TR headset

• 2014铝合金经过CNC精密加工而成；
• 包括两个立管垫圈；
• 固定螺丝采用钛合金制成；
• 整套重量为95克；
• 10种颜色可供选择。

• CNC AL 2014 aluminum, super light design.
• Include 2 pcs 1/4 inch spacers and one sinking head Titanium bolt.
• 95g for the whole set.
• In 10 different anodized color.

	ECHO TR 立管
	ECHO TR stem

• 4种角度可供选择: 20度120毫米和20度105毫米为26英寸车设计， 25度125毫米为24英寸车设计， 25度160毫米为20英寸车设计；
• 夹头经过CNC精密加工，螺纹的位置度和尺寸精度高，强度好；
• 本厂裁管、精密焊接，强度极高；
• 全无缝管材质，强度极高；
• 12.9级强度螺钉；
• 磨砂黑色。

• available in 4 different geometry: 105mm / 20° & 120mm / 20° for 26" bikes, 125mm / 25° for 24" bikes, 160mm / 25°or 20" bikes.
• CNC machined Fork steerer clipper and bar clipper.
  
• seamless tubing.
• 12.9 grade crmoly steel bolts.
• In sand blasted black only.

	ECHO TR 曲柄
	ECHO TR ISIS crank

• 6061铝合金锻造毛坯，经过CNC精密加工而成，强度高，精度高；
• 牙纹部分加工精度很高，曲柄转动时飞轮的跳动极小，同时强度很高，多次拆装飞轮都不会滑牙；
• 160毫米和170毫米两种规格；
• 160毫米每对460克，170毫米每对477克；
• 磨砂黑色。

• Forged al 6061 T6.
• CNC thread, for high strength and precision.
• Available in both 160mm & 170mm.
• 477g for 170mm, 460g for 160mm
• In sand blasted black only.

	ECHO TR 车圈
	ECHO TR rims

TR 前圈横截面 / front rim ： 18mmX38mm	TR 后 圈横截面 / Rear rim ：23.5mmX44mm

ECHO TR hub ---- front ---- none disc.

• 10mm AL 7075 T6 axle.
• AL 2014 hub shell for 14g spokes, 32 Holes
• 2 sealed bearings.
• 86g include bolts and washers.
• available in black anodized.

ECHO TR hub ---- front ---- disc.

• 10mm AL 7075 T6 axle.
• AL 2014 hub shell for 14g spokes, 32 Holes
• 2 sealed bearings.
• 125g include bolts and washers.
• available in black anodized color.

ECHO TR hub ---- rear ---- 116mm ---- none disc .

• 10mm crmo steel axle, 116mm O.L.D.
• AL 2014 hub shell, for 14g spokes, 32 holes
• 2 sealed bearings.
• steel CNC snail tensioner, 3mm thickness.
• 1.37"*24TPI thread.
• 222g include bolts and washers.
• available in black anodized color.

ECHO TR hub ---- rear ---- 116mm ---- disc .

• 10mm crmo steel axle, 116mm O.L.D.
• AL 2014 hub shell, for 14g spokes, 32 h
• 2 sealed bearings
• steel CNC snail tensioner, 3mm thickness.
• 1.37"*24TPI thread.
• 248g include bolts and washers.
• available in black anodized color.

ECHO TR hub ---- Rear ---- 135mm ---- none disc.

• 10mm crmo steel axle, 135mm O.L.D.
• 2014 hub shell, for 14g spokes, 32 holes
• 2 sealed bearings.
• 1.37"*24TPI thread.
• 209g include bolts and washers.
• available in black anodized color.

ECHO TR hub ---- rear---- 135mm ---- disc.

• 10mm crmo steel axle, 135mm O.L.D.
• 2014 hub shell, for 14g spokes, 32 holes
• 2 sealed bearings.
• 1.37"*24TPI thread.
• 235g include bolts and washers.
• available in black anodized color.

ECHO TR snail chain tensioners.

• Titanium means strong and light.
• Design for update ECHO TR rear hub.
• compatible with most other brand 116mm rear hubs.

ECHO TR chain tensioner for 26" bikes with vertical dropout

• Exclusive design for ECHO TR hubs with 10mm axle. Incompatible with any other hubs.
• Tension can be adjust by bending the spring. It can always keep the chain in good tension.
• Inside the frame design, you can't hit it when falling from sidehop. By using this tensioner, you can sidehop to right side without any worry.
• 40g, super light. Most other tensioner are 5 times more.
• Remove or install the rear wheel become convenient.
• In black anodized only.

The reb base is SL tensioner, the silver base one is TR tensioner:

© ECHO BICYCLES 1998-2011